Glove 2 Way 60-23mm/25-8mm

Item Number: KEV2/3
Packaging Unit: 1 / each
Quick and simple installation to seal and waterproof a termination
High resistance to tearing and high tensile strength
Resistant to UV, decay, chemicals and corrosion
Sign In or Apply to view your price

Need More options? Contact Sales Or request a quote from your cart

Product Information

KEV Heatshrink Boot/Glove 2 Way 60-23MM/25- 8MM

KEV Heatshrink Gloves (boots) are used to seal and waterproof cable terminations, by sealing the insulated conductors to the cable jacket. They have a hot melt glue liner that melts while the glove is shrinking and creates a strong bond between the glove and the cable.

• Quick and simple installation to seal and waterproof a termination.
• High resistance to tearing and high tensile strength.
• Resistant to UV, decay, chemicals and corrosion.

To install the glove, ensure that the insulation of the cable and conductor are clean and grease-free, and roughen with emery paper for a good glue bond. Shrink the glove from the middle out with a heat gun or soft yellow gas flame until adhesive extrudes. Avoid local overheating during the shrinkage process.

Technical Data:
Conformant Standards: ASTM & IEC
Material: Modified cross-linked polyolefin
Continuous Operating Temp: -40°C to +110°C
Min. Full Recovery Temp: 120°C
Tensile Strength: 14 MPa
Ultimate Elongation: 600%        
Dielectric strength: 17 kV/mm
Volume Resistance: 3.0 x 1014 Ω.cm
Water Absorption: 0.3%
Flammability: Do not use in flame prone areas

Line drawings available. See Technical Data.

Heatshrink Type: 2-Way Breakout Boot
Heatshrink Colour: Black
Pre-Shrink Diameter (mm): 60
After-Shrink Diameter (mm): 23
Heatshrink Tube Length (M): 0.095
Recovered Wall Thickness (mm): 2.4
Glue Lined: Yes
Write Your Own Review
You're reviewing:Glove 2 Way 60-23mm/25-8mm

Your ordered quantity for this item is more than what we have in stock.

Request a quote

List of Materials
Contact Details
Project Details

* State/Region

Would you like to add this website to your device home screen?